Landoll Icon 1024, Руководство по обслуживанию и запасным частям

Страница: 30 / 58

4-2 F-1070-0520
HOOKUP AND OPERATION
TABLE OF CONTENTS INDEX
Hookup to the Remote
Hookup of the hydraulic hoses to the remote can be done
in any way to suit individual needs. The following method
is suggested: Raise/Lower of the blade to #1 valve. Tilt of
the blade to #2.

CAUTION
NOTICE
Learning to Operate the Box
Scraper
Be patient for the first few hours of learning to operate the
Box Scraper. Time and experience will produce expert
results. Any type of blade machine has the tendency to
create a “washboard” effect if grading is done with too
much speed. Slow down and do the job right. The second
tendency of any blade machine is to side draft if the blade
is cutting deep and enough power is applied. Practice
centering the cut on the blade to balance the draft.
Operating the Box Scraper at a higher speed may not get
the job done quicker, and may provide less than quality
results. It is also recommended that the weight box be
filled prior to use. This will also aid in preventing side
draft, and bounce.
Responsible operation and proper maintenance will
provide many hours of expert results and a durable
machine.

CAUTION
When digging in a populated area, it is
recommended that a call be made to area utilities
to establish the local of any buried pipes, lines, or
structures. When digging in open area, research
and know the local of any underground
structures and objects.
Striking the blade and bit against surface or
buried objects can cause damage to the grader
and is considered as abuse to the machine.
Operator abuse will not be a warranty item.
This machine is not intended for highway use, it
should be used off road only.
If public roadway travel is necessary, be certain
of regulations concerning width, lighting, and
safety chain requirements.