Landoll Brilllion Till'N Seed BPSB-8, Руководство оператора

Страница: 69 / 76

MAINTENANCE
F-1097-2305 4-17
TABLE OF CONTENTS
Warning Lamps
When plugging in the 7-Pin Warning Lamp Connector:
1. Make sure the Tractor has a good clean Receptacle,
free of dirt and corrosion.
2. Make sure the 7-Pin Connector is inserted ALL the
way in. With tighter fitting pins, operator may think the
Connector is all the way in, but it really isn’t.
3. Make sure the Tractor Receptacle Cover latches over
the keyway on the 7-Pin Connector to hold the
Connector in place.
If an operator plugs in the 7-Pin Connector, but the lights
Do Not seem to work right, check the above items to
make sure there is a good connection with the 7-Pin
Connector.
Figure 4-26: Warning Lamps
Amber
Lamp
Warning
Lamp Harness
Flasher Control
Module
7-Pin/4-Pin
Harness
Red Lamp
Amber
Lamp