Landoll Brillion Turfmaker II Скачать руководство пользователя страница 98

Страница: 98 / 108

5-10

9K998-0522

MAINTENANCE

Warning Lamps

When plugging in the 7-Pin Warning Lamp Connector:
1. Make sure the Tractor has a good clean Receptacle,

free of dirt and corrosion.

2. Make sure the 7-Pin Connector is inserted ALL the

way in. With tighter fitting pins, operator may think
the Connector is all the way in, but it really isn’t.

3. Make sure the Tractor Receptacle Cover latches

over the keyway on the 7-Pin Connector to hold the
Connector in place.

If an operator plugs in the 7-Pin Connector, but the lights
do not seem to work right, check the above items to
make sure there is a good connection with the 7-Pin
Connector.

Figure 5-14: Warning Lamps

Amber

Lamp

Warning

Lamp Harness

Flasher Control
Module

7-Pin/4-Pin

Harness

Red Lamp

Amber

Lamp

Содержание Brillion Turfmaker II













































































































Результаты поиска

Содержание Brillion Turfmaker II

Отзывы:

Бренды по названию

Популярные бренды

Landoll Brillion Turfmaker II, Руководство оператора

Результаты поиска

Содержание Brillion Turfmaker II

Отзывы:

Бренды по названию

Популярные бренды