Landoll BRILLION TURFMAKER II SL Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 100

background image

2-16

9K998

ASSEMBLY

Warning Lamp Installation, 8Ft

and 10Ft

NOTE

10Ft Drawbar model is shown, 10Ft 3Pt, 8Ft Drawbar
and 8Ft 3Pt models similar.

1. Attach Amber Lamp to the upper portion of the Light

Bracket located at the ends of the Seedbox with
1/4-20 x 1-1/4 Bolts and Locknuts.

2. Attach Red Lamp below the Amber Lamp with 1/4-20

x 1-1/4 Bolts and Locknuts. Ensure Red Lamp Lens
faces rearward.

3. Attach the Light Module to the Module Bracket with

1/4-20 x 1-1/2 Bolts and Locknuts.

See Figure 2-22.

4. Layout the Lamp Harness, noting that the connectors

marked with Green Tape is Right Side and Yellow
Tape is Left Side.

5. Connect the Lamp Harness into the Light Module,

route the plugs with Green Tape along the front right
side of the Frame. Route the 3 prong cord up the
Light Bracket and plug into the Red Lamp. Route the
2 prong cord along the front of Frame, up the outer
Light Bracket and plug it into the Amber Lamp.

6. Repeat for the Left Side (Yellow Tape).
7. Plug the 7 Pin Harness into the Light Module, then

route the Harness along the Drawbar with the
Hydraulic Hoses and secure with Tie Wraps.

8. Bundle and secure excess cord to the Module

Bracket with Tie Wraps. Secure cords along frame
and drawbar using Adhesive Mounts and Tie Wraps.

NOTE

Install, route and secure Electric Clutch Harness with the
Lamp Harness.

IMPORTANT

All Harnesses must be firmly attached to machine
frame members or hydraulic hoses so they do not
sag or become torn loose by field debris.

9. Attach the SMV sign to the SMV Support with

5/16-18 x 1” Bolts, Flat Washers, and Locknuts.

10. Attach the Connector Holder to the Hose Support

with 1/4-20 x 1 Bolts, Flat Washers, and Locknuts.

NOTE

The plug on the other end of the 7 Pin harness connects
to the tractor socket when in use. When not in use, it can
be stored in the Connector Holder on the Hose Support.
Allow enough harness length to reach tractor socket and
roll or fold up excess and secure to Drawbar or Hydraulic
Hoses.

Figure 2-22: Light Module and Bracket

0RGXOH
%UDFNHW

/LJKW0RGXOH

/RFNQXW

%ROW

[

«
...
30
31
32
33
34
...
»

Содержание BRILLION TURFMAKER II SL





































































































Отзывы:

Нет отзывов

Похожие инструкции для BRILLION TURFMAKER II SL

Бренд: OMCA Страницы: 72

Бренд: Barko Hydraulics Страницы: 92

Бренд: Nectar Страницы: 46

Бренд: Neauvia Страницы: 17

Бренд: Onwa Страницы: 35

Бренд: Rowlinson Garden Products Страницы: 5

Бренд: Crosley Страницы: 6

Бренд: Gambro Страницы: 273

Бренд: SAC Страницы: 2

Бренд: ICON Страницы: 24

Бренд: Yardbird Страницы: 12

CB Ohio Special 100 HP

Бренд: CleaverBrooks Страницы: 200

HydraMaster driMaster HiFlo Upholstery Tool

Бренд: U.S. Products Страницы: 28

Бренд: Bowa Страницы: 44

Бренд: NeckXsystems Страницы: 12

Бренд: Parker Страницы: 40

Бренд: Cameo Страницы: 44

Бренд: ParAid Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды