Landoll Brillion BH1020, Руководство оператора

Страница: 11 / 32

2-1
Chapter 2
Assembly
This chapter covers proper assembly of your implement.
Refer to the BH1020 Bridge Hitch Parts Manual F-777 for
complete part breakdowns and proper location of any
parts not shown in the following illustrations.
NOTE
Additional parts identification and location can be
obtained by reviewing the F-777 Parts Manual.

WARNING
IMPORTANT
• If pre-assembled parts or fasteners are temporarily
removed, remember where they go. It is best to keep
the parts separated.
• Check that all working parts move freely, bolts are
tight and cotter pins are spread.
• Refer to the Torque Table for proper bolt torque
values. Note the different torque requirement for bolts
with lock nuts.
See Page 4-1.
“Left” and “Right” refer to directions seen as if standing
behind the machine and facing in the direction of forward
travel.
Do not work on or under this machine unless
securely
supported by a hoist or tractor or by
other sufficient means.