Landoll Brillion 4630-36 Series, Руководство оператора

Страница: 17 / 40

ASSEMBLY INSTRUCTIONS
3-7
Seed Shaft Sensor Mounting
Dimension
Check pre-assembled Seed Shaft Sensor and Bracket so
the center line of magnet wheel and sensor are
horizontally and vertically aligned with a maximum 1/8”
between magnet wheel and sensor. Make necessary
adjustments and tighten hardware.
NOTES
Depending on the seeding rate it may be necessary to
move sensor left or right in bracket slot to ensure magnet
is within sensor range, since magnet moves with seed
shaft when adjusting seed rate.
Alignment of the Seed Shaft Sensor and Magnet Wheel
is critical. Improper alignment will cause the sensor to
work erratically or not at all.
Figure 3-5: Brome Box
Figure 3-6: Seed Meter
1/8" Max
Seed Shaft
Sensor
Magnet
Magnet Mount
Assembly
Shaft Sensor
Bracket
1/8" Max
Magnet Wheel
Assembly
Shaft Sensor
Bracket
Seed Shaft
Sensor
Magnet