Landoll Brillion 4630-36 Series, Руководство оператора

Страница: 14 / 40

3-4 F-640-0615 Edition
ASSEMBLY INSTRUCTIONS
Seed Shaft Sensors
Mount Console with Clutch Control on Tractor. See
Figure 3-2.
See Figures 3-3 or 3-4 for Seedbox Sensor Schematic.
1. Route Console Harness with 24 Pin Connector to the
Main Sensor Harness which is pre-assembled inside
the seeder hitch.
2. Attach 3 Pin Power Plug to tractor.
3. Secure console harness with Tie Straps
4. If additional seeder parts information is needed See
page 2-1 for individual seeder model manuals.
5. Connect the Center Seeder Harness to the Main
Harness plug labeled “Center Seeder Harness”.
6. Route Center Seeder Harness along front frame of
center seeder. Ensure plug labeled Electric Clutch
Power is on the left side.
7. On left side connect plug labeled “Electric Clutch
Power” to the Electric Clutch lead.
8. Connect plug labeled “Left Front Seed Shaft Sensor”
to the left front Seed Shaft Sensor.
9. If you have a double box seeder connect the plug
labeled “Left Rear Seed Shaft Sensor” to the left rear
Seed Shaft Sensor. Otherwise, seal the plug end
using a 3-Pin Tower and Cavity Plugs to protect it
from the environment.
10. Connect the Right Seeder Harness to the Main
Harness plug labeled “Right Seeder Harness”.
11. Route Right Seeder Harness along front frame of
right seeder. Ensure plug labeled Electric Clutch
Power is on the left side.
12. On left side connect plug labeled “Electric Clutch
Power” to the Electric Clutch lead.
13. Connect plug labeled “Left Front Seed Shaft Sensor”
to the left front Seed Shaft Sensor.
14. If you have a double box seeder connect the plug
labeled “Left Rear Seed Shaft Sensor” to the left rear
Seed Shaft Sensor. Otherwise, seal the plug end
using a 3-Pin Tower and Cavity Plugs to protect it
from the environment.
15. Repeat steps 10-14 for the Left Side Seeder.
16. After installing the center seeder LED warning lights,
connect the Ag Harness to the front and the Light
Module to the rear of the Main Harness.
17. Secure all harnesses and wires with cable tie and tie
straps.
Figure 3-2: Console with Clutch Control
5 9/16" REF
3 3/4"
REF
3 3/4"
REF