Landoll Brillion 3631-25, Руководство оператора

Страница: 62 / 138

2-46 F-979-0219
ASSEMBLY
Bearing Hanger and Wing Rest
Installation
1. Assemble a Rubber Bumper onto each Wing Rest
Bracket with 1/2-13 x 3-1/2 Bolts, Flat Washers and
Locknuts.
See Figure 2-42.
2. Attach Bearing Hanger to Wing Frame on the Bottom
with 3/4-10 x 2-1/4 Bolts and Locknuts.
Do Not
Tighten at this Time. Place the Wing Rest Bracket
over the outside of the Bearing Hanger. Assemble
the Wing Rest Bracket and Bearing Hanger onto the
Wing Frame with 3/4-10 X 2-3/4 Bolts and Locknuts.
Tighten the 3/4-10 Bolts at this time.
3. Secure the end of the Wing Rest to the Wing Frame
with 5/8-11 U-Bolts and Flanged Locknuts.
Figure 2-42: Wing Rest and Bearing Hanger
)URQW
2S:LQJ%UJ+DQJHU
%UDFNHW
:LQJ5HVW
%ROW[
)ODW:DVKHU
5XEEHU%XPSHU
/RFNQXW
)ODQJHG
/RFNQXW
)ODQJHG
8%ROW
/RFNQXW
%ROW[
%ROW[
%DQJHU