Landoll Bendi B40i4, Руководство оператора

Страница: 10 / 66

1-2 F-808-R0
FORKLIFT SAFETY AND FAMILIARITY
Operators must be retrained when new equipment is
introduced, existing equipment is modified, operating
conditions change or an operator’s performance is
determined unsatisfactory.
The truck is to be inspected daily for problems or damage
which may risk the driver’s safety and any people in the
work area, or possible damage to the truck and the load
being moved.
When trucks are used on a round-the-clock basis, they
must be inspected after each shift.
Problems found must be reported and corrected. The
truck is to be taken out of operation until all repairs have
been made and the truck has been re-inspected for
safety.
IMPORTANT
Anytime you are doing maintenance or repair on the
Landoll B40i4 truck, unless the truck must be on for
investigative testing, remove the key from the key switch
console. Remove the main power fuse or connector and
install a commercially available Lock Out/Tag Out device
at the battery connectors, because it’s possible to have a
duplicate key. Also, install a lockout warning reminder on
the steering wheel warning that the truck is not available
for use.
Terminology and Illustrations
Used in Manual
Whenever front and rear, right and left are mentioned
throughout this manual, it is assumed that you are seated
in the vehicle looking toward the forks.
This manual makes use of many pictures and illustrations
to help you to locate components on your B40i4 forklift
and allow you to follow instructions/procedures.
You will notice that most illustrations have an identifying
Figure number below the illustration frame. As an
example ... “Figure 1-1.”
Understanding Safety
Statements
You will find various types of safety information on the
following pages and on the machine decals (signs)
attached to the vehicle. This section explains their
meaning. The Safety Alert Symbol means ATTENTION!
YOUR SAFETY IS INVOLVED!
NOTICE

CAUTION

WARNING

DANGER
NOTE
You should read and understand the information
contained in this manual and on the machine decals
before you attempt to operate or maintain this forklift.
Special notices - Read and understand
thoroughly.
Proceed with caution. Failure to heed caution
may cause injury to person and/or damage
product.
Proceed with caution. Failure to heed warning
will cause injury to person and/or damage
product.
Proceed with extreme caution. Failure to heed
notice will cause injury or death to the person
and/or damage product.