Landoll 900D Series, Руководство оператора

Страница: 26 / 82

3-14 F-823-0216 Edition
OPERATING INSTRUCTIONS
Winch Controls
DANGER
1. The Winch Hydraulic lever is located on the driver’s
side of the semitrailer under the outer frame beam
(See Figure 3-3.)
It is the second lever from the left
and has three positions
(See Table 3-2.)
Table 3-2: Winch Hydraulic Lever
WARNING
1. The winch is not designed or intended to be
used for lifting or moving people. Using it this
way can cause serious injury or death.
2. Never attempt to disengage the winch cable
spool when the cable is under tension. The
load can roll away. Serious injury or death
can result if people are in the path of the
rolling load.
3. Failure to leave at least five winch cable
wraps on the winch cable spool could allow
the cable to come off the spool, resulting in
serious personal injury or death.
WINCH HYDRAULIC LEVER
UP (PUSH IN)
This position will cause the winch to
reel cable onto the winch spool when
the winch clutch handle is engaged.
CENTER
This is the neutral position. This
position will not operate the winch.
DOWN
(PULL OUT)
This position will cause the winch to
reel cable off of the winch spool when
the winch is engaged.
Do not handle the winch cable when the winch is
in the engage position. Hands or clothing could
get caught in the cable and be pulled into the
spool causing serious personal injury.
Ea
st
ern
W
re
cke
r Sa
le
s
In
c