Landoll 1550 Series, Руководство оператора

Страница: 23 / 36

ASSEMBLY INSTRUCTIONS
3-11
Hydraulic Installation (D and E
Models Only)
1. Pin cylinder rod to wing bracket using clevis pin.
2. Install 90
o
elbow with restrictor into each port of
hydraulic cylinders (See Figure 3-6.)
3. Install Hose 1 from hydraulic manifold to the base
end of the left hydraulic cylinder.
4. Install Hose 2 from hydraulic manifold to the rod end
of the left hydraulic cylinder.
5. Install Hose 3 from hydraulic manifold to the rod end
of the right hydraulic cylinder.
6. Install Hose 4 from hydraulic manifold to the base
end of the right hydraulic cylinder.
7. Install coupling Hoses 5 from the front of the
hydraulic manifold to the 1/2 male couplers. Connect
the coupler fittings to the tractor.
8. Install o-ring plug in rear ports of hydraulic manifold.
1550 SERIES HYDRAULIC HOSE
ITEM PART NUMBER DESCRIPTION USED ON MODEL
1 1-397-010299-14 HOSE ASSEMBLY, 24” D
1-397-010299-10 HOSE ASSEMBLY, 41” E
2 1-397-010299-16 HOSE ASSEMBLY, 44” D
1-397-010299-02 HOSE ASSEMBLY, 60” E
3 1-397-010299-11 HOSE ASSEMBLY, 64” D
1-397-010299-24 HOSE ASSEMBLY, 80” E
4 1-397-010299-10 HOSE ASSEMBLY, 41” D
1-397-010299-02 HOSE ASSEMBLY, 60” E
5 1-397-010299-02 HOSE ASSEMBLY, 60” D AND E