
Installation
14/49
Welding sleeve with pockets
Fig. 10: Installation with pockets (recommended greater than or equal to qp 10)
Fig. 11: Installation for circulation with admixing; placement of temperature sensors
Fig. 12: Installation for circulation with throttling configuration for example (flow sensor in flow direction
upstream control valve / differential pressure regulating valve)
Installation notes for sensor adapter set (temperature sensor directly immersed)
A mounting set is included for meters with 5.2 × 45 mm temperature sensors.
It allows for mounting the temperature sensors directly immersed into an insert
or a ball valve for example.
1.
Install with the O-ring at the point of installation with the fit-up aid/pen pro-
vided.
2.
Place both halves of the plastic bolting round the 3 notches of the tempera-
ture sensor.
3.
Press the bolting together and screw the bolting hand tight into the point of
installation until it comes to a stop (tightening torque 3
… 5 Nm).
Fig. 13: Mounting adapter set