49
5. Maintenance and Troubleshooting
5.1.
Cleaning
It is recommended to clean the console and screen after each
workout.
General:
Vacuum around and under the bike at least once a
month. Wipe any sweat from the bike after each workout.
Console and Display Screen:
Wipe exposed console
surfaces with a microfiber cloth, dampened with a mixture of
30 parts water to 1 part Simple Green
®
cleaner.
www.simplegreen.com
Wireless Chest Strap (Optional):
The transmitter activates
when the belt is moist. To conserve battery life, wipe the
electrodes dry after each use. Clean monthly with mild soap
and water and wipe dry.
5.2.
Maintenance
5.2.1. Pedals
The pedals may become loose after workouts. Check the
pedals before each workout and tighten them if necessary to
avoid injury. Turn the right pedal clockwise and the left pedal
counterclockwise to tighten. Check all bolts and screws
frequently to avoid injury.
5.2.2. Moving the Bike
The bike has two small wheels at the front to assist with moving
it if needed. To move the bike, lift it at the rear, then roll on front
wheels to desired location. See page 10 and page 11 for the
location of the small wheels
CAUTION
To avoid damaging the electrodes, do not use
abrasives to clean the chest strap. Do not bend
or stretch the electrode strips, especially when
storing the chest strap.
ATTENTION
Pour éviter d'endommager les électrodes,
n'utilisez pas d'abrasifs pour nettoyer la ceinture
thoracique. Ne pliez pas et n'étirez pas les
bandes d'électrodes, en particulier lors du
rangement de la ceinture pectorale.
