Land Pride WB10, Руководство оператора

Страница: 17 / 22

Section 3: Maintenance & Lubrication
WB10 Weight Box 335-064M 3/8/21
13
Table of Contents
Maintenance
Proper servicing and adjustments are key to the long life
of any equipment. With careful inspection and routine
maintenance, you can avoid costly downtime and repair.
Check all hardware after several hours of operation and
regularly thereafter to ensure they are tight and secured.
Check the Weight Box for structural cracks and other
damages. Make structural repairs before using the box.
Replace worn, damaged, or illegible safety labels by
obtaining new labels from your Land Pride dealer.
WARNING
!
To prevent serious injury or death:
•
Perform scheduled maintenance. Check for loose
hardware, missing parts, broken parts, structural cracks,
and excessive wear. Make repairs before putting the
implement back into service.
•
Allow only persons to perform maintenance on this
implement who have been properly trained in its safe
operation.
•
Before any maintenance is performed, lower the Weight Box
to ground, shut the tractor engine off, and remove the
ignition key. Do not attempt to perform maintenance with
tractor running.
•
Always secure equipment with solid, non-concrete supports
before working under it. Never go under equipment
supported by concrete blocks or hydraulics. Concrete can
break, hydraulic lines can burst, and/or hydraulic controls
can be actuated even when power to hydraulics is off.
•
Do not alter implement or replace parts on the implement
with other brands. Other brands may not fit properly or
meet OEM (Original Equipment Manufacturer)
specifications. They can weaken the integrity and impair the
safety, function, performance, and life of the implement.
Replace parts only with genuine OEM parts.
Long Term Storage
Read all warnings under maintenance before continuing.
Clean, inspect, service, and make necessary repairs to
the Weight Box when storing it for long periods and at the
end of the season. This will help to ensure the unit is
ready for field use the next time you hook-up to it.
1. Remove any dirt and grease that may have
accumulated on the box. Scrape off compacted dirt
and then wash the surface thoroughly with a garden
hose. A coating of oil may also be applied to the lower
supports to minimize oxidation.
2. Inspect the box for loose, damaged, or worn parts.
Adjust and tighten loose parts. When needed,
replace parts with genuine OEM parts only.
3. Repaint parts where paint is worn or scratched to
prevent rust. Ask your dealer for Land Pride aerosol
touch-up paint. They are also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
4. A light coating of oil or grease may be applied to the
areas on the bottom where paint is worn minimize
oxidation.
5. Replace all damaged or missing decals.
6. Clean out the four bottom drain holes in the bottom
four corners of the box to allow accumulated
moisture in the box to drain out.
7. Store Weight Box on a level surface in a clean, dry
place. Inside storage will reduce maintenance and
increase the life of the Weight Box.
Ordering Replacement Parts
Land Pride offers equipment in factory standard Beige
with black highlights. This implement may also be
purchased in Orange or Black.
When ordering an optional color, the suffix number
corresponding to the color must be added at the end of
the part number. Parts ordered without the suffix number
will be supplied in factory standard colors.
For example, if you are ordering a replacement part with
part number 555-555C and the existing part is orange,
then add the suffix 82 to the end of the number to make
the part number read 555-555C82.
Land Pride Aerosol Touch-up Paint
Part No. Part Description
821-011C PAINT LP BEIGE SPRAY CAN
821-070C PAINT LP BLACK SPRAY CAN
821-066C PAINT ORANGE SPRAY CAN
82 . . . . . . . Orange
85 . . . . . . . Black
Section 3: Maintenance & Lubrication