Land Pride STH2024, Руководство оператора

Страница: 29 / 32

Section 7: Troubleshooting
Table of Contents
STH2024 Spike Tooth Harrow 322-315M 12/10/18
25
Section 7: Troubleshooting
STH2024 Troubleshooting
Problem Cause Solution
Bent or broken teeth Hitting solid objects Avoid hitting solid objects
Bent tooth bar Added weights to the harrow Remove weights.
Hitting solid objects with harrow
in the ground. Inspect field and mark areas of trouble such as
stumps, broken fence post and outcropping of rocks.
Hitting solid objects with harrow
raised. Stay away from buildings, fences, trees banks and
other solid objects when traveling straight and
turning corners.
Excessive tooth wear Added weights to the harrow Remove added weights.
Loose teeth Tighten teeth to the tooth bar.
Harrow does not penetrate the ground Grass, wire and trash have
accumulated under the harrow. Remove grass, wire and trash from under the
harrow.
Teeth not set at the correct
angle Adjust angle of teeth to be more upright.
Ground is too hard Break ground with a field tool.
Loose teeth Locknuts have worked loose Tighten locknuts to the correct torque.
Replace locknuts that won’t stay tight.
Spike tooth mounting holes are
wallowing out. Teeth are loose Check for loose nuts frequently,
Tighten loose nuts to the correct torque.