Land Pride SSB1566, Руководство оператора

Страница: 18 / 24

Section 3: Maintenance & Lubrication
Table of Contents
11/11/19 SSB1566 & SSB1578 Skeleton Buckets 380-101M
14
Maintenance
Proper servicing and adjustment is the key to the long life
of any attachment. With careful inspection and routine
maintenance, you can avoid costly downtime and repair.
Check all bolts and pins after using the bucket for several
hours and on a regular basis thereafter to ensure they are
tight and secured.
Check hitch fit-up on a regular basis to ensure trash or
other objects have not loosened the hitch connection.
Replace worn, damaged, or missing bucket parts only
with genuine Land Pride parts.
Replace illegible or missing safety labels by obtaining
new labels from your Land Pride dealer. Refer to
“Safety
Labels” on page 6 for installation instructions.
DANGER
!
To avoid serious injury or death: Always secure equipment
with solid, non-concrete supports before working under it.
Never go under equipment supported by concrete blocks or
hydraulics. Concrete can break, hydraulic lines can burst,
and/or hydraulic controls can be actuated even when power to
hydraulics is off.
WARNING
!
To avoid serious injury or death:
•
Always shut power machine down following the “Shutdown
Procedure” provided in this manual before leaving the
operator’s seat.
•
Allow only persons to perform maintenance on this
attachment who have been properly trained in its safe
operation.
•
Check hitch fit-up frequently. An improper fit-up can cause
the attachment to come loose from the loader hitch plate
and fall.
•
Perform scheduled maintenance. Check for loose
hardware, missing parts, broken parts, structural cracks,
and excessive wear. Make repairs before putting the
implement back into service.
•
Do not alter attachment or replace parts on the attachment
with other brands. Other brands may not fit properly or
meet OEM specifications. They can weaken the integrity
and impair the safety, function, performance, and life of the
attachment. Replace parts only with genuine OEM parts.
Section 3: Maintenance & Lubrication
Long-Term Storage
DANGER
!
To avoid serious injury or death: Always secure equipment
with solid, non-concrete supports before working under it.
Never go under equipment supported by concrete blocks or
hydraulics. Concrete can break, hydraulic lines can burst,
and/or hydraulic controls can be actuated even when power to
hydraulics is off.
WARNING
!
To avoid serious injury or death:
•
Always shut power machine down following the “Shutdown
Procedure” provided in this manual before leaving the
operator’s seat.
•
Do not alter attachment or replace parts on the attachment
with other brands. Other brands may not fit properly or
meet OEM specifications. They can weaken the integrity
and impair the safety, function, performance, and life of the
attachment. Replace parts only with genuine OEM parts.
Clean, inspect, service, and make necessary repairs to
the bucket when storing it for long periods and when
storing it at the end of a working season. This will help
ensure that the unit is ready for use next time you
hook-up to it.
1. Clean off any dirt and grease that may have
accumulated on the bucket. Scrape off compacted
dirt and then wash its surface thoroughly with a
garden hose.
2. Inspect bucket for loose, damaged, or worn parts
and adjust or replace when needed.
3. Repaint parts where paint is worn or scratched to
prevent rust. Ask your Kubota dealer for aerosol
touch-up paint. They are also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
4. Replace all damaged or missing guards & decals.
5. Store bucket on a level surface in a clean, dry place.
Inside storage will reduce maintenance and make for
a longer bucket life.
6. Do not allow children to play on or around the stored
bucket.
Touch-Up Paint
Part No. Part Description
821-070C Gloss black enamel spray can
821-070CTU Gloss black enamel bottle with brush
821-070CQT Gloss black enamel quart
821-070CGL Gloss black enamel gallon