Land Pride RTA2072, Руководство оператора

Страница: 30 / 40

Section 4: Maintenance & Lubrication
Table of Contents
RTA2072 & RTR2072 Rotary Tillers 311-328M 9/12/22
26
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the implement when storing it for long periods and at the
end of the season. This will help to ensure the unit is
ready for field use the next time you hook-up to it.
DANGER
!
To avoid serious injury or death:
Always disconnect driveline from the tractor and secure the
implement in the up position with solid, non-concrete supports
before servicing the underside. A person can become
entangled in the drivetrain if the tractor is started and power
take-off is engaged or crushed by an unsupported implement.
WARNING
!
To avoid serious injury or death:
Always shut tractor down according to “Tractor Shutdown
Procedure” provided in this manual before allowing anyone
including the operator to hook up or unhook the implement.
1. Clean off any dirt and grease that may have
accumulated on the Rotary Tiller. Scrape off
compacted dirt and then wash surfaces thoroughly
with a garden hose.
2. Inspect the tiller for loose, damaged, or worn parts
and adjust or replace if needed.
Repaint parts where paint is worn or scratched to prevent
rust. Ask your Land Pride dealer for Aerosol touch-up
paint. They are also available in touch-up bottles with
brush, quarts, and gallon sizes by adding TU, QT, or GL
to the end of the Aerosol part number.
3. A coating of oil may be applied to worn surfaces in
lieu of painting to minimize oxidation.
4. Replace all damaged or missing decals.
5. Lubricate as noted in
“Lubrication Points”
on page
27.
6. Drain and refill gearbox and chaincase oil. Be sure to
replace all oil plugs.
•
Drain oil in gearbox by removing the bottom drain
plug or right-hand cap.
•
Drain oil in chaincase by removing the bottom plug
and tipping tiller backwards.
7. Store tiller on a level surface in a clean, dry place.
Inside storage will reduce maintenance and make for
a longer tiller life.
8. Follow all parking instructions on page 20 when
disconnecting tractor from tiller.
Land Pride Touch-up Paint
Part No. Part Description
821-011C PAINT LP BEIGE SPRAY CAN
821-066C PAINT ORANGE SPRAY CAN
821-070C PAINT GP GLOSS BLACK SPRAY CAN
Ordering Replacement Parts
Land Pride offers equipment in factory standard Beige
with black highlights. This implement is also available in
Orange.
When ordering an optional color, the suffix number
corresponding to the color must be added at the end of
the part number. Parts ordered without the suffix number
will be supplied in factory standard colors.
For example, if you are ordering a replacement part with
part number 555-555C and the existing part is orange,
then add the suffix 82 to the end of the number to make
the part number read 555-555C82.
82 . . . . . . . Orange 85. . . . . . . Black