Introduction
12/4/18
7
Introduction
Land Pride welcomes you to the growing family of new
product owners. This Rotary Cutter has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this implement.
Application
The medium duty RCR26 Series Rotary Cutters are built
and designed by Land Pride for cutting on gently sloping
or slightly contoured right-of-ways, pastures, set aside
acres, and row crop fields. Their 60" cutting width on the
RCR2660 and 72" cut on the RCR2672 makes them
compatible with more maneuverable and lower 35 to 130
horsepower tractors with 540 rpm power take-off and Cat.
l & ll three point hitches. Also they are Quick Hitch
adaptable. Both units feature a single laminated trailing
wheel and
4-plate slip clutch protection.
The RCR26 Series clears grass, weeds, and light brush
up to 3" in diameter and has a cutting height range of
2" to 12" with a cutting blade tip speed of 12,384 fpm.
These units come with a standard 3/16" heavy-duty
stump jumper and replaceable skid shoes. The stump
jumper on the RCR2660 is 25" round in diameter and the
RCR2672 features a 32" round pan configuration.
Optional rubber deflectors or chain guard selections are
available.
See
“Specifications & Capacities”
“Features & Benefits”
on page 32 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1.
Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
35907