Land Pride RCP2760, Руководство оператора

Страница: 74 / 78

Section 10: Features & Benefits
Table of Contents
3/12/21 RCP(M)2760 & RCP(M)3760 Parallel Arm Rotary Cutter 316-548M
70
Section 10: Features & Benefits
RCP(M)27 & RCP(M)37 Series (Parallel Arm)
Features Benefits
Tractor hp Range
RCP(M)2760
RCP(M)3760 Designed for 75 minimum hp tractor with minimum weight of 8,000 lbs. (3629 kg)
Designed for 95 minimum hp tractor with minimum weight of 12,000 lbs. (5443 kg)
Gearbox hp Rating
150 hp
3 Point Design
Does not tie up a tractor. Three point hook up is easy to hook up and remove from tractor.
Cutter Deck Visibility Visibility of the
cutter
deck is captured from the operator’s seat. Easy to see operation.
Operator does not have to look behind.
Factory Assembled
Arrives ready for the customer, saves time and money. (Excluding fluids).
Grease Ports
All grease ports are easily accessible for servicing.
10' Transport Width
Folds up close to the tractor. No weight brackets or decks hanging away from the tractor.
Typically, not much wider than the tractor, which means safer transporting.
Parallel Arm Design
Three cylinders used in a parallel arm design allows any cylinder to be adjusted without
changing the position of the others. Means less positioning.
Long Horizontal Reach
RCP(M)2760 = 15'-6" (4.72 m)
RCP(M)3760 = 18'-10" (5.74 m)
Good access for reaching vegetation far away from the tractor.
Better access for reaching vegetation far away from the tractor.
Above Grade Vertical Reach
RCP(M)2760 = 11'-5" (3.47 m)
RCP(M)3760 = 13'-5" (4.08 m)
Good access for reaching up embankments and cutting low over hanging limbs.
Better access for reaching up embankments and cutting low over hanging limbs.
Below Grade Reach
RCP(M)2760 = 9'-1" (2.76 m)
RCP(M)3760 = 11'-0" (3.35 m)
Good access for reaching down embankments.
Better access for reaching down embankments.
180 Degree Operating Tilt Arc
Cutter head can be positioned to reach different angles.
Cat. 2 & 3; 540 or 1000 rpm
Fits a wide variety of tractors.
40 Gallon Oil Reservoir
Large reservoir maintains optimum fluid temperatures and also serves as counterweight.
2" (5 cm) Cutting Capacity Ideal for trimming brush.
High Blade Tip Speed 15,000 fm (4,572 meters / minute) tip speed means cleaner cutting.
Two Parking Stands Easy and level storage, makes it easy for hooking to tractor.
In-line Filter Cleans hydraulic fluid before it re-enters the reservoir.
Shut-off Valve Permits maintenance with minimum oil loss.
Oil Pressure Gauge
Easily monitor oil pressure for optimum performance of unit.
Hydraulic Breakaway
Allows the parallel arms to pivot backwards to avoid obstacles and to protect
cutter
deck
and parallel arms. Parallel arms are pivoted back to normal operating position with the
hydraulic breakaway cylinder.
Gauge Wheels Option
Decks on gauge wheels eliminating frequent deck positioning and vigilant watch for
changes in ground contour under the tractor and deck.
Independent Control Option
(Self-Contained Hydraulics) Self contained hydraulic system eliminates the tractor/RCP hydraulic incompatibility. This
option uses the RCP hydraulic system to operate the cutter.
Kubota 3-Point Stabilizer Kit
Makes the RCP2760 Parallel Arm Rotary Cutter a match fit for Kubota tractor model
numbers
M126GX, M135GX, M6-141, and M6-141.
Slow Moving Vehicle Mounting
Socket (Standard)
Slow Moving Vehicle Sign
(Accessory)
Mounting socket receives most slow moving vehicle signs equipped with a mounting blade
for ease of attachment and removal when transporting on a truck or trailer.
Slow moving vehicle sign is offered as an accessory when the tractor’s slow moving vehicle
sign and mounting blade does not fit the cutter’s standard mounting socket.