background image

Section 8: Warranty 

GB2590, GB2596, GB25108, GBE2590, GBE2596, & GBE25108 Grapple Buckets 380-192M

3/3/20

33

Table of Contents

Warranty

Land Pride warrants to the original purchaser that this Land Pride product will

be  free  from  defects  in  material  and  workmanship  beginning  on  the  date  of
purchase  by  the  end  user  according  to  the  following  schedule  when  used  as
intended and under normal service and conditions for personal use. 

Overall Unit:

 One year Parts and Labor

Hydraulic Cylinder:

One year Parts and Labor; 
Hoses and seals are considered wear items.

This Warranty is limited to the repair or replacement of any defective part by

Land Pride and the installation by the dealer of any such replacement part, and
does not cover common wear items. Land Pride reserves the right to inspect any
equipment  or  parts  which  are  claimed  to  have  been  defective  in  material  or
workmanship.

This  Warranty  does  not  apply  to  any  part  or  product  which  in  Land  Pride’s

judgment  shall  have  been  misused  or  damaged  by  accident  or  lack  of  normal
maintenance  or  care,  or  which  has  been  repaired  or  altered  in  a  way  which
adversely  affects  its  performance  or  reliability,  or  which  has  been  used  for  a
purpose for which the product is not designed. Misuse also specifically includes
failure to properly maintain oil levels, grease points, and driveline shafts.

Claims under this Warranty should be made to the dealer which originally sold

the product and all warranty adjustments must be made through an authorized
Land Pride dealer. Land Pride reserves the right to make changes in materials or
design of the product at any time without notice.

This Warranty shall not be interpreted to render Land Pride liable for damages

of any kind, direct, consequential, or contingent to property. Furthermore, Land
Pride  shall  not  be  liable  for  damages  resulting  from  any  cause  beyond  its
reasonable control. This Warranty does not extend to loss of crops, any expense
or loss for labor, supplies, rental machinery or for any other reason.

No other warranty of any kind whatsoever, express or implied, is made

with respect to this sale; and all implied warranties of merchantability and
fitness for a particular purpose which exceed the obligations set forth in this
written warranty are hereby disclaimed and excluded from this sale.

This Warranty is not valid unless registered with Land Pride within 30 days from

the date of purchase.

Section 8: Warranty

IMPORTANT: 

The Online Warranty Registration should be completed by the dealer at the time of 

purchase. This information is necessary to provide you with quality customer service.

Model Number ____________________ 

Serial Number ____________________

Содержание GB25108







































Отзывы: