background image

 Important Safety Information

FC10 C-Tine Field Cultivator 335-043M

1/14/19

4

Table of Contents

Safety Labels

Your C-Tine Field Cultivator comes equipped with all safety 

labels in place. They are designed to help you safely operate 

your implement. Read and follow their directions.
1. Keep all safety labels clean and legible.

2. Refer to this section for proper label placement. Replace 

all damaged or missing labels. Order new labels from your 

nearest Land Pride dealer. To find your nearest dealer, 

visit our dealer locator at www.landpride.com.

3. Some new equipment installed during repair requires 

safety labels to be affixed to the replaced component as 

specified by Land Pride. When ordering new components 

make sure the correct safety labels are included in the 

request.

4. Refer to this section for proper label placement.

To install new labels:

a. Clean surface area where label is to be placed.
b. Spray soapy water onto the cleaned area.
c. Peel backing from label and press label firmly onto the 

surface.

d. Squeeze out air bubbles with edge of a credit card or 

with a similar type of straight edge. 

]

39559

818-719C

Caution: General Information (1 Place)
Located left side of 3-point hitch.

Important Safety Information

Содержание FC10

























Отзывы: