Land Pride FC10, Руководство оператора

Страница: 18 / 24

Section 4: Maintenance
FC10 C-Tine Field Cultivator 335-043M 1/14/19
14
Table of Contents
C-Tine Shank and Blade Maintenance
Figure 4-2
C-Tine Shanks
Refer to Figure 4-2:
Inspect C-tine shanks (#5) and tine support brackets (#1)
for wear, fatigue, structural cracks, and distorted shape.
Replace tine shanks and support brackets as needed.
1. If tine blade (#9) is reusable, remove tine blade from
existing C-tine shank (#6). See
“C-Tine Blades” on
page 13 for detailed instructions.
2. Remove hex nut (#3), lock washer (#4), and hex
head bolt (#2).
3. Discard C-tine shank (#5).
4. Inspect tine support bracket (#1) for damage. If
needed, discard and replace tine support bracket
with a new bracket.
5. Reattach new C-tine shank (#5) with existing or new
tine support bracket (#1), 5/8"-11 x 1 3/4" GR5 hex
head bolt (#2), lock washer (#4), and hex nut (#3).
Tighten hex nuts to the correct torque.
6. Attach new or existing tine blade (#9) to the C-tine
shank (#5). See “C-Tine Blades” on page 13 for
detailed instructions.
39564
Item Pt. No. Description
1 335-094D LH TINE SUPPORT BRACKET (Shown)
1 335-102D RH TINE SUPPORT BRACKET
2 802-053C HHCS 5/8-11X1 3/4 GR5
3 803-021C NUT HEX 5/8-11 PLT
4 804-022C WASHER LOCK SPRING 5/8 PLT
5 820-616C C-TINE SHANK
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the implement when storing it for long periods and at the
end of the season. This will help to ensure the unit is
ready for field use the next time you hook-up to it.
1. Clean off any dirt and grease that may have
accumulated on the cultivator. Scrape off compacted
dirt from C-tines and then wash surface thoroughly
with a garden hose.
2. Check C-tines blades and attaching hardware for
wear and replace if necessary. See “Section 4:
Maintenance” on page 13.
3. Inspect for loose, damaged, or worn parts and adjust
or replace as needed.
4. Clean and apply a coat of paint to the land-polished
surfaces and scratches on the cultivator to minimize
oxidation while in storage. Ask your Land Pride dealer
for aerosol touch-up paint. They are also available in
touch-up bottles with brush, quarts, and gallon sizes
by adding TU, QT, or GL to the end of the aerosol part
number.
5. Replace all damaged or missing guarding & decals.
6. Store cultivator on a level surface in a clean, dry
place. Inside storage will reduce maintenance and
make for a longer cultivator life.
7. Follow all unhooking instructions on page 9 when
disconnecting tractor from cultivator.
Land Pride Touch-up Paint
Part No. Part Description
821-066C PAINT ORANGE SPRAY CAN
821-070C PAINT GP GLOSS BLACK SPRAY CAN