manualshive.com logo in svg

Land Pride BB1560, Руководство оператора, Страница: 10 / 22

Поделиться
Скачать
Land Pride BB1560 Скачать руководство пользователя страница 10

Section 1: Assembly & Set-up 

Table of Contents

9/25/18

BB1560, BB1566, BB1572, BB2560, BB2566, BB2572, BB2584, & BB2596 Fixed Bar Box Scraper 303-082M

6

Hitch & Shank Assembly

Figure 1-1

15234

Section 1: Assembly & Set-up

Hitch Assembly

Refer to Figure 1-1:

1.

Attach 3-point hitch straps (#1) & hitch braces (#2) to 
Box Scraper frame with 3/4"-10 x 2” GR5 bolts (#3), 
lock washers (#4), and hex nuts (#5). 

Do not tighten 

nuts

 at this time. 

2. (BB25 Only) Align hitch straps (#1) with lower hitch 

holes to allow hitch pins (#6) to pass through. 

3. Align upper middle holes in hitch straps (#1) with 

holes in hitch braces (#2) as shown. With 2" long 
spacer (#10) positioned in the center, insert 
3/4"-10 x 5" GR5 hex cap screw (#11) through hitch 
braces, straps, and spacer. Secure bolt with lock 
washer (#12) and hex nut (#13).

4. When hitch is attached it will form an A-frame. Make 

sure the A-frame is positioned square to the Box 
Scraper frame and then tightening assembly 
hardware to the correct torque.

IMPORTANT: 

(BB25 & BB15) Hitch straps (#1) must 

be oriented with upper middle hole in the most 
forward position for a Quick Hitch to fit correctly.

Tractor Requirements

Tractor horsepower should be within the range noted 
below. Tractors outside the horsepower range must not 
be used.

Horsepower {Maximum} . . . . . . . . . . . . . . . . . . . . . . .

BB15 . . . . . . . . . . . . . . . . . . . . . .  40 power take-off
BB25 . . . . . . . . . . . . . . . . . . . . . .  55 power take-off

Hitch Type. . . . . . . . . . . . . . . . . . . . . . .  3-point Cat. 1

WARNING

!

To avoid serious injury or death:  
Lightweight tractors with rear attached implements may need 

weights added to the front to maintain steering control. 

Consult your tractor Operator’s Manual to determine proper 

weight requirements and maximum weight limitations.

Torque Requirements

Refer to 

“Torque Values Chart”

 on page 16 to 

determine correct torque values when tightening 
hardware. 

*Always follow manufacturer instructions*

*AAA Rent-All 225-291-1356*

Содержание BB1560























Отзывы:

Нет отзывов