Land Pride 315-507M, Руководство оператора

Страница: 44 / 58

Section 5: Maintenance & Lubrication
Table of Contents
AFM4211 All-Flex Grooming Mower 315-507M 3/8/23
40
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the implement when storing it for long periods and at the
end of the season. This will help ensure the unit is ready
for field use the next time you hook-up to it.
1. Clean off any dirt and grease that may have
accumulated on the mower and moving parts.
Scrape off compacted dirt from the bottom of the deck
and then wash surface thoroughly with a garden hose.
A coating of oil may also be applied to the lower deck
area to minimize oxidation.
2. Check blades for wear and replace or sharpen if
necessary. See
“Blade Sharpening”
on page 37.
3. Inspect mower for loose, damaged or worn parts and
adjust or replace as needed.
4. Lubricate as noted in “Lubrication” on page 41.
5. A light coat of oil or grease may be applied to the
deck and to any exposed hydraulic cylinder rods to
minimize oxidation.
6. Release spring tension from drive belt. Refer to
“Blade Removal and Installation”
on page 36.
7. Repaint parts where paint is worn or scratched to
prevent rust. Ask your dealer for Land Pride aerosol
touch-up paint. They are also available in touch-up
bottles with brush, quarts and gallon sizes by adding
TU, QT or GL to the end of the aerosol part number.
8. Replace all damaged or missing decals.
9. Store mower on a level surface in a clean, dry place.
Inside storage will reduce maintenance and make for
a longer mower life.
10. Store driveline end off the ground.
Land Pride Touch-up Paint
Part No. Part Description
821-011C PAINT LP BEIGE SPRAY CAN
821-066C PAINT ORANGE SPRAY CAN
821-070C PAINT GP GLOSS BLACK SPRAY CAN
Ordering Replacement Parts
Land Pride offers equipment in factory standard Beige
with black highlights. This implement is also available in
Orange.
When ordering an optional color, the suffix number
corresponding to the color must be added at the end of
the part number. Parts ordered without the suffix number
will be supplied in factory standard colors.
For example, if you are ordering a replacement part with
part number 555-555C and the existing part is orange,
then add the suffix 82 to the end of the number to make
the part number read 555-555C82.
82 . . . . . . . Orange 85. . . . . . . Black