Lancom VP-100, Руководство пользователя

Страница: 12 / 50

LANCOM VP - 100
쮿
Chapter 2: Basic configuration of the LANCOM VP
-
100
12
EN
2 Basic configuration of the LANCOM VP-100
In order to make and receive telephone calls the LANCOM VP-100 requires a
connection to a SIP gateway at a public provider, a LANCOM VoIP Router or a
VoIP-capable PBX.

We will describe the configuration of the LANCOM VP-100 primarily
based on the web interface. Configuration via the keypad is also
possible. Information of configuration via the keypad can be found in
the description of the menu in the appendix (’Keypad navigation’
→
Page 44).
2.1 Quick installation via keypad (LANCOM Easy Setup)
The LANCOM VP-100 is optimally equipped for a quick and easy setup. The
start up is particularly easy with the LANCOM VP-100 when a LANCOM VoIP
Router is available in the LAN to regulate communications between VoIP
subscribers. In this situation, LANCOM Easy Setup can be used to enter all of
the parameters necessary for operating the LANCOM VP-100. The "normal"
configuration will be necessary to register the LANCOM VP-100 at a public SIP
provider or a VoIP-capable PBX.

Requirements for a successful quick installation: The LANCOM VoIP
Router has to work as the DHCP server in the LAN and control the
assignment of IP address information.
For the quick installation, all information is entered into the LANCOM VP-100
which is necessary for registration at the LANCOM VoIP Router. The procedure
differs depending on the setting for local authentication in the LANCOM VoIP
Router:
쮿
If there is no local authentication, any VoIP device can register at a
LANCOM VoIP Router as long as it sends (any) telephone number and
valid domain. The domain is communicated by DHCP from the LANCOM
VoIP Router to the devices in the LAN. Thus there is no need for terminal
devices to be entered explicitly into the LANCOM VoIP Router.
쮿
In case of local authentication, only devices with an explicit entry as a SIP
user can register with the LANCOM VoIP Router. The telephone number is
defined along with an authentication name and a password.