3
LANCOM Installation Guide – Introduction
Introduction
This LANCOM R&S
®
Unified Firewall Migration Guide describes how to
upgrade the software of your LANCOM R&S
®
Unified Firewall to LCOS FX
10.4 or newer.
Target group
This document is intended for network and computer technicians who
are responsible for installing and configuring the systems of the LANCOM
R&S
®
Unified Firewall.
Chapter overview
The contents of this document will assist you in upgrading your LANCOM
R&S
®
Unified firewall and in the steps required after the upgrade.
This document contains the following chapters:
A
Chapter “To be checked before the upgrade“ on page 5
Steps to consider before the upgrade
A
Chapter “Supported devices“ on page 6
Hardware supported by version LCOS FX 10.4
A
Chapter “Removed functions“ on page 6
A list of functions that the LANCOM R&S
®
Unified Firewall does not
provide in LCOS FX 10.4 and above
A
Chapter “Manual settings“ on page 7
Settings that you must manually reconfigure after the upgrade
A
Chapter “Upgrading the LANCOM R&S
Unified Firewall from versions
9.6 and 9.8“ on page 9
Upgrade information for versions 9.6 and 9.8 of the LANCOM
R&S
®
Unified Firewall
