Lancom L-54g Wireless Скачать руководство пользователя | Manualshive

Страница: 70 / 81

background image

LANCOM L

-

54g Wireless - LANCOM L

-

54ag Wireless - LANCOM L

-

54 dual Wireless

Chapter 7: Options and accessories

69

EN

7 Options and accessories

Your LANCOM device has numerous extensibilities and the possibility to use a
broad choice of LANCOM accessories. You find in this chapter information
about the available accessories and how to use them with your base station.

The range of the base station can be increased by optional antennas of
the AirLancer series and can be adapted to special conditions of environs.

With the LANCOM Public Spot Option option it is possible to extend the
LANCOM for additional billing and accounting functions in order to
upgrade it to a Wireless Public Spot.

7.1

Optional AirLancer Extender antennas

AirLancer Extender antennas are capable of extending the operating range of
the devices, or of adapting access point coverage to local conditions. An over-
view of the supported antennas is available from the LANCOM Web site under

You will also find further information on calculating the best configu-
ration for AirLancer Extender antennas and third-party antennas that
you wish to connect to the LANCOM under

www.lancom.eu

.



When assembling separately purchased mobile radio antennas please
note that the maximum allowed transmission power of the wireless
LAN according to EIRP in the country in question may not be excee-
ded. The system operator is responsible for adhering to the threshold
values.



For internal lightning protection, the surge adapter AirLancer
Extender SA-5L is

always necessary

—the AirLancer Extender SA-5L

is mounted between the Access Point and the antenna, as close to the
antenna as is possible.



Antennas are only to be attached or changed when the device is swit-
ched off. Mounting or demounting antennas while the device swit-
ched on may cause the destruction of the WLAN module!

7.1.1

Antenna diversity

The transmission of radio signals can suffer from significant signal losses
because of reflection and scatter, among other reasons. In some areas, the

«
...
68
69
70
71
72
...
»

Содержание L-54g Wireless


















































































Отзывы:

Нет отзывов

Похожие инструкции для L-54g Wireless

MSR900-E Routers

Бренд: H3C Страницы: 38

Бренд: H3C Страницы: 64

UniFi WiFi BaseStationXG UWB-XG-BK

Бренд: Ubiquiti Страницы: 16

Бренд: Hewlett Packard Enterprise Страницы: 6

Бренд: RAK Страницы: 19

Бренд: Skyrc Страницы: 2

Бренд: Loopcomm Страницы: 2

Бренд: ZyXEL Communications Страницы: 144

Бренд: ZyXEL Communications Страницы: 206

Бренд: ZyXEL Communications Страницы: 225

Бренд: LYNKSYS Страницы: 499

Бренд: Enterasys Страницы: 52

Бренд: Conrad Страницы: 76

Бренд: Amer Страницы: 59

Бренд: EnGenius Страницы: 78

ORiNOCO AP-2500

Бренд: Proxim Страницы: 2

Бренд: Ubiquiti Страницы: 14

Бренд: Xirrus Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды