Lancom L-54g Wireless Скачать руководство пользователя | Manualshive

Страница: 21 / 81

background image

LANCOM L

-

54g Wireless - LANCOM L

-

54ag Wireless - LANCOM L

-

54 dual Wireless

Chapter 2: Installation

20

EN

of the former configuration. Instructions on firmware uploads via the
serial configuration interface are available in the LCOS reference
manual.

Boot only: A press of the button prompts a restart, regardless of how
long the it is held down.

Power-over- Ethernet – elegant power supply through the LAN wiring

LANCOM Access Points are prepared for the PoE power supply (Power-over-Ethernet), corre-
sponding to the 802.3af standard. PoE-enabled network devices can be comfortably supplied
with power feeding through the LAN wiring. A separate external power supply for each base
station is unnecessary, which reduces the installation complexity considerably.

The power feeding into the LAN happens at a central position, either via a PoE power injector,
or via a so-called powerhub/powerswitch. For the LAN wiring is to note that all 8 wires must
be available by the cabling. PoE feeds the power over those four wires, which are normally
not used for data transfer.

The PoE supply works only in such network segments, in which exclusively PoE-capable
devices are operating. The protection of network devices without PoE support is guaranteed
by an intelligent mechanism, that tests the network segment for devices without PoE support
before starting the PoE power feeding. The power is only switched onto the segment, if only
devices with PoE support were detected.



In a PoE installation use exclusively devices which correspond to the 802.3af stand-
ard! For damages caused by inadmissible devices no warranty may be claimed.



For the LANCOM L-54 dual Wireless, two LAN sockets can be used for redundant
power supply. The device itself selects the power source to be used. If a power outage
causes a switch between power sources, the device reboots so that the power feed is
reactivated, if appropriate.

Switch

PoE - 48 V

ACCESS POINT

230 V

Power Injector

Installation of single devices

Installation of several devices

PoE Switch 48 V

ACCESS POINT

ACCESS POINT

230 V

Power switch

«
...
19
20
21
22
23
...
»

Содержание L-54g Wireless


















































































Отзывы:

Нет отзывов

Похожие инструкции для L-54g Wireless

Бренд: 3Com Страницы: 6

Бренд: ZyXEL Communications Страницы: 2

Бренд: Ubiquiti Страницы: 32

AR 18-3XE/18-21X Series

Бренд: H3C Страницы: 79

Бренд: H3C Страницы: 41

LigoPTP 5-23 UNITY

Бренд: LogoWave Страницы: 14

3CRWEASYG73 - 11g Wireless LAN Outdoor

Бренд: 3Com Страницы: 4

BLUESOCKET 1930

Бренд: ADTRAN Страницы: 4

Бренд: Ebyte Страницы: 13

Бренд: MFOURTEL Страницы: 19

Бренд: ZyXEL Communications Страницы: 2

Wi-Fi Bubble SpitFire

Бренд: NAUTITECH Страницы: 22

RG-AP740-I Series

Бренд: Ruijie Страницы: 31

Бренд: HPE Страницы: 4

Бренд: HPE Страницы: 4

Бренд: Credo mobile Страницы: 6

Бренд: Cambium Networks Страницы: 15

Wireless Router

Бренд: TELEFONICA Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды