LANCOM Wireless DSL – LANCOM Wireless ADSL
Chapter 2: Installation
28
EN
The WLAN link display can assume three states:
WLAN data
Gives information about the data traffic in the wireless LAN access.
The WLAN data display can assume three states:
VPN
Status of a VPN connection. Only active with LANCOM VPN Option installed.
Security
Status of the firewall. Indicates the status of the security settings and averted
attacks to the protected network.
off
No wireless LAN adapter found
green
constantly on
Wireless LAN adapter ready for use
green
flickering
Activity in wireless LAN (blinking frequency indicates the
number of registered stations)
off
No data traffic
green
flickering
Data traffic
green
flashing
Error in the wireless LAN (e.g. sending error because of bad
connection quality)
off
No VPN tunnel established
green
blinking
Negotiating VPN connection
green
flashing
Establishing first connection
green
inverse flashing
Establishing further connection
green
constantly on
VPN connection established
green
constantly on
Security settings ok. Packet filter rules are set.
red/
green
blinking
Insecure configuration
red
flickering
Security alert: data packet filtered by firewall rules