![background image](http://html1.mh-extra.com/html/lancom/1780ew-3g/1780ew-3g_hardware-quick-reference_672883001.webp)
Please observe the fol-
lowing when setting up
the device
1
For devices to be
operated on the desktop,
please attach the
adhesive rubber footpads
1
Do not rest any objects
on top of the device
1
Keep the ventilation slots
on the side of the device
clear of obstruction
1
In case of wall mounting,
Use the drilling template
as supplied
1
Rack installation with the
optional LANCOM Rack
Mount (not supplied)
LANCOM
1780EW-3G
Hardware Quick Reference
M
O
u
N
t
i
N
g
A
N
d
C
O
N
N
e
C
t
i
N
g
u
p
t
e
C
H
N
i
C
A
L
d
e
t
A
i
L
s
LANCOM, LANCOM S
ystems and L
COS ar
e r
egister
ed tr
ademarks. All other names or descriptions used may be tr
ademarks or r
egister
ed tr
ademarks of their owners. Subject to change without notice.
No liability for technical err
ors and/or omissions.
110933
/0711
Optional:
WAN
Use a cable with
the green-colored
connectors to con-
nect the interfaces
ETH2 to your WAN
modem.
Optional:
Wireless LAN antennas
Screw the two supplied
WLAN antennas onto
the connectors WLAN1
and WLAN2. Depending
on how the antennas
are to be used, 'Antenna
Grouping' may need to
be configured in order to
provide the desired MIMO
behavior.
Optional:
siM card
Slide the SIM card into the slot using the
marker to ensure that the card is the right
way round.
Ensure that the SIM card clicks into place
on insertion. To remove the card from the
device again, press the card lightly into
the device. Let go to release the SIM card
from the slot.
Optional:
LAN
Use a cable with
the kiwi-colored
connectors to con-
nect the interfaces
ETH1 to your PC or
a LAN switch.
Optional:
3g antennas or
gps antenna
Screw the two supplied
cellular antennas onto the
connectors 3G Aux and
3G Main.
Alternatively screw
the free available GPS
antenna onto the connec-
tors 3G Aux (see included
voucher).
power
No
Device switched off
Constant green
Device operational
Blinking green
Configuration password not set.
Without a configuration password,
the configuration data in the device is
unprotected.
etH 1 and etH 2
No
No networking device attached
Constant green
Connection to network device
operational, no data traffic
Flickering green
Data traffic
4
LANCOM 1681V
Power
VDSL
Online
ETH
1
ETH 2
VP
N
ETH
3
ETH 4
ISDN Statu
s
power
When connecting the
cable to the device, turn
the bayonet connector
90° clockwise until it
clicks into place.
Use only the supplied
power adapter.
5
VpN
No
VPN connection inactive
Blinking green
Establishing VPN connections
green constantly on VPN connection active
3g
No
UMTS interface switched off
Blinking red/green
SIM card error
Blinking orange
Logging on to cellular network
orange constantly on
Logon to cellular network successful
green constantly on or
blinking
Cellular connection active; faster blinking
indicates faster connection
Wireless LAN
No
No WLAN network defined or WLAN
module deactivated. The WLAN module is
not transmitting beacons.
Green
At least one WLAN network is defined
and WLAN module activated. The WLAN
module is transmitting beacons.
green inverse
flashing
Number of flashes = number of connected
WLAN stations and P2P wireless connec-
tions, followed by a pause (default).
Alternatively the frequency of the flashing
can indicate signal strength over the
defined P2P link or the signal strength
between the access point and the device
operating in client mode.
Blinking green
DFS scanning or other scan procedure.
Hardware
Power supply
12 V DC, external power supply unit (230 V) with bayonet connector to prevent unplugging
Power consumption
Max. ca.13.5 W
Environment
Temperature range 5 – 40 °C; humidity 0 – 95%; non-condensing
Housing
Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; measures
210 x 45 x 140 mm (W x H x D)
Number of fans
None; fanless design, no rotating parts, high MTBF
interfaces
WAN
10/100Base-TX, autosensing, auto node hub
LAN
10/100/1000 Base-TX, autosensing, auto node hub
External antenna con-
nectors
Two reverse SMA connectors for external LANCOM AirLancer Extender antennas or for anten-
nas from other vendors. Please respect the restrictions which apply in your country when
setting up an antenna system. For information about calculating the correct antenna setup,
please refer to www.lancom.eu.
External antenna con-
nectors
Two SMA antenna connectors for external UMTS antennas (RX diversity) or for operating a GPS
antenna at the AUX connector
Serial interface
Serial configuration interface / COM port (8-pin Mini-DIN):
9,600 - 115,000 baud, suitable for optional connection of analog/GPRS modems. Supports
internal COM-port server and provides transparent asynchronous serial-data transfer via TCP
WLAN protocols
Ethernet
PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP),
RIP-1, RIP-2, VLAN, IP
uMts modem
Supported standards: UMTS, HSPA+ (HSDPA with up to 21 Mbps, HSUPA with up to 5.76 Mbps), EDGE and GPRS
support
UMTS HSxPA bands
850/900/1900/2100 MHz
EDGE GPRS bands
850/900/1800/1900 MHz (EDGE to max. 236 Kbps)
declaration of conformity
CE
EN 55022, EN 55024, EN 60950
2.4 GHz WLAN
ETS 300 328
5 GHz WLAN
EN 301 893 Version 1.5.1, EN 302 502 (BFWA)
Notifications
Certifications notified in Germany, Belgium, Netherlands, Luxembourg, Austria, Spain, Switzer-
land, UK, Italy, Portugal, Czech Republic, Denmark, Malta, France
package content
Manual
Hardware Quick Reference (DE/EN)
Installation Guide (DE/EN/FR/ES/IT/PT/NL)
CD/DVD
CD/DVD with firmware, management software (LANconfig, LANmonitor, LANCAPI) and docu-
mentation
Cable
2 Ethernet cable, 3m (LAN: kiwi-colored connector; WAN: green connector)
Antennas
Two 3dBi dipole dualband antennas
Antennas
Two 2-dBi dipole UMTS/GPRS antennas (850-960 Mhz and 1700-2220 Mhz)
Power adapter
External power supply adapter (230V), NEST 12 V/1.5 A DC/S, barrel connector 2.1/5.5 mm
bayonet, LANCOM item no. 110723
. . . c o n n e c t i n g y o u r b u s i n e s s
Optional:
serial configuration
cable
Connect the device to a
PC with a configuration
cable
(available as accessory).
H>B
BD9:B
d
f
g
a
b
b
a
c
d
f
g
c
e
e
When working with separately purchased antennas, please ensure you
do not exceed the maximum permissible transmission power. The system
operator is responsible for adhering to the threshold values.
Antennas are only to be attached or changed when the device is switched off.
Mounting or demounting antennas with the device switched on may cause the
destruction of the 3G or WLAN modules!
5
The SIM card is only to be
inserted or removed when the
device is switched off. Inserting
or removing the SIM card with the device
switched on may cause the destruction of
the 3G module!
5
A6C8DB&,-%:L"(<
(<
KEC
:I='
EdlZg
:I=&
LA6C
License information for the device firmware (LCOS) is available in the file LCOS-Licenses.txt on the data medium
supplied.