LANCOM 1722 VoIP – LANCOM 1723 VoIP – LANCOM 1724 VoIP – LANCOM 1823 VoIP
Chapter 5: Configuring the VoIP functions
65
EN
5 Configuring the VoIP functions
If you wish to employ the LANCOM VoIP Router as a PBX, you should initially
carry out the basic settings and then read the manual on the VoIP PBX func-
tions. This describes the quickest way to to set up the PBX with connections
to landlines (ISDN or analog).
If you wish to operate an ISDN PBX behind the LANCOM VoIP Router, and thus
you would like to leave the telephony interfaces in the default configuration,
then please continue with the configuration described here, which uses the
VoIP Call Manager wizard.
For more specialized applications, please refer to the corresponding
chapters in the LCOS reference manual.
Mark your LANCOM Router in the selection window. From the command
line, select
Extras
Setup Wizard
.
In the selection menu, select the Setup Wizard,
Configure Voice over IP
Call Manager
and confirm the selection with
Continue
.
In the following windows, you will choose the lines and subscribers that
you want to create. Enter the required information for this.
The wizard will inform you as soon as the entries are complete. Close the
configuration with
Finish
.
