LANCOM 1722 VoIP – LANCOM 1724 VoIP
Chapter 2: Installation
43
EN
tion about a later assignment of the configuration password see the
section ’Security settings’
Online
The Online LED indicates the overall status of all WAN ports:
ADSL
Connection status of the ADSL link:
Flashing Power LED but no connection?
There's no need to worry if the Power LED blinks red and you can no
longer connect to the WAN. This simply indicates that a preset time or
connect-charge limit has been reached. There are three methods
available for unlocking:
Reset connect charge protection.
Increase the limit that has been reached.
Completely deactivate the lock that has been triggered (set limit
to '0').
If a time or connect charge limit has been reached, you will be notified in LANmonitor. To
reset the connect charge protection, select
Reset Charge and Time Limits
in the context
menu (right mouse click). You can configure the connect charge settings in LANconfig under
Management
Costs
(you will only be able to access this configuration if 'Complete con-
figuration display' is selected under
View
Options…
).
You will find the connect charge protection reset in WEBconfig and all parameters under
Expert Configuration
Setup
Charges- module
.
Signal for reached time
or connect-charge
limit
Power
Power
LANCOM
Systems
off
no active connection
green
flashing
Establishing first connection
green
inverse flashing
Establishing further connection
green
constantly on
At least one connection established
red
constantly on
Error establishing the previous connection
off
interface switched off
green
blinking
Initialisation
green
flashing
Establishing first connection
green
invers flashing
Establishing further connection
green
constantly on
at least one connection established
green
flickering
Data traffic (send or receive)
Содержание 1722 VOIP
Страница 1: ...LANCOM 1722 VoIP LANCOM 1724 VoIP...