LANCIER Monitoring RTS 1000D, Руководство по эксплуатации

Страница: 35 / 68

Emergency mode
If, during maintenance or repair works, the connected pressurised air consumer must continue to be supplied
with pressurised air, a mobile pressurisation system (e.g. series LAM) can be connected to the testing valve (
8 )
of the RTS pressurisation systems or directly to the pneumatic inlet of the distribution panel.
Risk of damage to property!
If the generated Pressurised air is routed via digital flow meters (FMA) to the consumer loads, it
must be pre-filtered with 5 µm and oil-free!
• Switch off operating voltage!
• Attach connecting hose of the mobile system onto the testing valve (
8 ) of the stationary system.
• Close shut-off valve ( 9 ) of stationary system.
• Set mobile system into operation while observing the respective instruction manual and safety instruc-
tions.
Retrofit kit signalisation for emergency mode
For easy and quick connection of the signalisation wires of mobile pressurisation systems LANCIER Monitoring
offers retrofit kits:
Retrofit kit signalisation LAM – RTS 750 up to RTS 5200D
Order no.: 073426.000
We recommend to use the consulting service of LANCIER Mon-
ritoring before ordering.
Shut down operation
• Blow out compressor cooler ( 23 ) with pressurised air
(RTS 2600D & RTS 5200D only).
• Turn off motor protective switch ( 5 ).
• Switch off operating voltage!
• Depressurise equipment!
- Open shut-off valve ( 9 ) for this.
• Remove connecting hoses from the connection nozzle ( 4 ).
• Close shut-off valve ( 9 ) again.
• If necessary, branch off electrical connections. 5
Deadly risk!
Switch off operating voltage!
Page 35