LANCIER Monitoring RTS 1000D, Руководство по эксплуатации

Страница: 34 / 68

Operation On - Off
Deadly risk!
Do not operate the equipment with damp hands!
Take caution with live components!
Risk of injury!
Take caution with heated components!
Connection equipment pneumatics
• Switch off operating voltage!,
• Open cabinet door
• Close shut-off valve (
9 ).
• Remove screw cap of the required connection nozzle ( 4 ).
• Establish pneumatic connection to pressurised air con-
sumers.
8 9 4
Assignment outputs/flow meters RTS 1000D (Option)
• If flow meters are installed, the assignment to the connect-
ion nozzle is as follows:
Flow meters read line-by-line from left to right
= connection nozzle from left to right
• If necessary mark the classification of connection nozzle to
the shut-off valves (option) of pressurised air consumers.
Assignment outputs/flow meters RTS 2600D und RTS 5200D
• If flow meters are installed, the assignment to the connect-
ion nozzle is as follows:
Flow meters read line-by-line from left to right
= connection nozzle diagonal from left to right
• If necessary mark the classification of connection nozzle
to the shut-off valves (option) of pressurised air con-
sumers.
Normal mode
• Switch on operating voltage.
• Wait until the equipment and, if supplied, the backup air storage tank (option) are charged.
- The Signal-LED „ N “ ( 51 ) in the MFR ( 73 ) turns off, when the preset cable pressure is nearly achieved.
- The compressor switches off at 5.5 bar.
• Open shut-off valve ( 9 ) and if necessary, shut-off valves (option) of pressurised air consumers,
- the compressor automatically switches on and off when reaching the lower and upper pressure values
• Close cabinet door.
1
1
6
2
7
3
8
4
9
5
10
1 6 2 7 3 8 4 9 5 10
Page 34