8
28-0752/02
MVU #4 (Left Side)
*Virtual brands indirectly report a Sold Out from association with a sub-flavor that has Sold Out enabled. For ex-
ample, in MVU #4 (above), if position B reports a Sold Out, position E will also report a Sold Out because position
B is a sub-flavor of position E. In MVU #1, if position B reports a Sold Out, position D will report a Sold Out because
position D is a sub-flavor of position B.
Set MVU Buttons as Carbonated, Non-Carbonated, or Flavor Shot Only.
The MVU can be programmed to serve soda or plain water beverages as well as a flavor shots from each of the
beverage positions on the valve.
To enter the programming mode on the MVU and assign water type to each individual brand (Carbonated or
Non-carb):
POSITION
A
B
C
D
E
F
WATER/
SODA
Water Type
Plain
Water
Soda
Soda
Off
Off
Off
Water
Shot
On
On
On
Off
Off
On
Virtual
Brand
No
No
No
No
B&F
No
Sold Out On
No
Yes
No
No
Yes*
No
STEP 1
Press both A and C brand buttons at the same
time on the MVU panel for five seconds.
The “Pour/Cancel” LED will illuminate. The
“SHOT” LED will blink one time.
Brands that are enabled for drinks will have
illuminated LED’s:
Lights on = non-carb
Lights flashing = carb
Lights flashing quickly = enabled for virtual
brands. Buttons will not respond to key presses.
Lights off = no water (deactivated unless set for
shot).