ITEM NO. : 30197
STEP 3.
1. Lay top Board (3) on ground. Add sideboards (1 &2): line up cam lock screw (Ax4) and cam lock (Fx4).
Tighten cam lock (Fx4) with screwdriver once boards are in place.
2. Align bottom board (7) with remaining cam lock screws(A). Tighten cam locks with screwdriver.
BEFORE ASSEMBLE
TIGHTEN ALL THE A
SCREWS AFTER THEY ARE
INERTED INTO THE BOARD
A
STEP 4.
1. Rotate the rectangle made in step 3 so that right side
side (1) is touching the ground. Then place back
board (5) onto the back side of the rectangular
piece. Align the cam lock screws (Ax8) in the
corresponding holes. Tighten the cam lock (Fx5)
with screwdriver.
2. Place 2 small cam lock screws (bx2) in the predrilled
holes on the underside of bottom board (7).
STEP 5.
Align 2 screws (B) on bottom board (7)
with holes on kickboard (4), press
kickboard onto screws.
(5)
B
(4)
(1)
(2)
(3)
(7)
A
