Lanberg © 2015-2021
15
EN
e.
Factory settings
Restore factory settings
– after selecting this function recorder
will be restored to factory settings. User, channel and network
settings remain unchanged.
Configuration Import / Export
– allows you to export the
configuration of the recorder before the restoration and import
it later.
I.
CAMERA SETTINGS
1.
Camera management
a.
Arrows
– allow you to move cameras between channels
b.
Delete
channel – allows you to delete the
selected channel.
c.
Delete
all – allows you to delete all channels.
d.
Edit
– allows you to modify network parameters of
a camera, such as IP address, login/password, showing
MAC address, etc.
e.
Channel
settings – opens the channel settings window,
described in detail in Section H.4.B.
f.
Wireless
settings – opens the Network and IP settings
window, described in detail in Section H.3.D.
g.
Repeater
– opens the Repeater Settings window, de-
scribed in detail in section K.
2.
Adding new cameras
a.
Search
– the recorder will search the network for uncon-
nected IP cameras.
b.
Pair
allows you to synchronize unconnected WIFI came-
ras from other kits or manufacturers.
NOTE: IP CAMERAS FROM OTHER SETS AND MANUFAC-
TURERS MUST BE PRE–CONNECTED VIA NETWORK CABLE
DIRECTLY TO THE RECORDER OTHERWISE THEY WILL NOT
BE DETECTED.
NOTE: WHEN PAIRING IS COMPLETE, YOU CAN DISCON-
NECT THE NETWORK CABLE CONNECTING THE CAMERA TO
THE RECORDER.
c.
Add
– allows you to add cameras found in the network
to specific channels.
d.
Change
IP – allows you to modify network parameters of
a camera before connecting it to the recorder, such as IP
address, login/password, showing MAC address, etc.
e.
Advanced
– in this window you can allow to add the
same camera on many channels and whether the came-
ras should have their bitrate set automatically.
