Lamtec ETAMATIC OEM, Быстрая справка

Страница: 18 / 24

17
9 Appendix
9 Appendix
9.1 Mode Abbreviations Used
Fig. 9-1 Status display at customer interface Fig. 9-2 Display at programming unit
Short text Description
BE → READY (signal on terminal 58)
ZÜ → IGNITION POSITION or IGNITION
EZ → SETTING/IGNITION position (same as IGNITION, but ETAMATIC
OEM on SETTING)
GL → BASE FIRING RATE
EG → SETTING/BASE FIRING RATE” (as BASIC FIRING RATE, but ETA
-
MATIC OEM on SETTING)
NA → POST-PURGE
AU → BURNER OFF (no signal present)
EL → SETTING
SL → CLEAR MEMORY
EV → SETTING/PRE-PURGE" (as "PRE-PURGE", but ETAMATIC OEM on
SETTING)
ES → SETTING/CONTROL (as AUTOMATIC but ETAMATIC OEM on SET)
ST → FAULT
VO → PRE-PURGE
HA
or Hand → MANUAL MODE (burner efficiency may be adjusted manually)
no display → Burner set to AUTOMATIC during OPERATION
LE → EXTERNAL FIRING RATE (firing rate controller disabled by digital
input)