21
7.12 Stove inactivity
At the end of the season, perform the following operations:
•
Remove all pellets from the tank and from the feed screw.
•
Thoroughly clean the brazier, the support brazier, the combustion chamber and the ash drawer.
•
Thoroughly clean the smoke exhaust system: contact a professional chimney sweep for this purpose.
•
Clean all dust, spider webs, etc. from the area behind the panels of the inner cladding once a year.
•
Clean fans thoroughly.
7.13 Routine and special maintenance
These operations should be programmed ANNUALLY with a Technical Assistance Centre and are
necessary to ensure the maintenance of product efficiency and ensure safe operation.
•
Thoroughly clean the combustion chamber and the heat exchanger.
•
Smoke motor, dismantling and cleaning of the smoke exhaust duct, new silicone where required.
•
Inspection and verification of gaskets, springs and replacement and application of the silicone where
required.
•
Tank, emptying and cleaning.
•
Check and replacement, if necessary, of components that are subject to wear: brazier, ash drawers,
etc.
