16
these may be too high in moisture. Forcing ignition could make your stove a hazard.
•
CAUTION: if during cleaning, you find traces of spongy or hard (though not ash) pellets, replace
the pellets being used, as this residue may come from scraps of low quality sawdust not usable
in this type of stove. Forcing ignition can cause a fire or strong production of fumes in the
chimney.
•
monitor proper combustion of the pellets in the brazier. Should you detect accumulations of
unburned pellets, IMMEDIATELY TURN OFF the stove and contact the service centre.
•
CAUTION: pay the utmost attention when children are present to prevent them from standing in
front of the stove.
6.1 Components
Fig. 14
6.2 Filling up the tank
Raise the lid
A
and move the pellet loading lever to position 1
(fig.11)
; move lid
B,
using the handle,
towards position open
(fig.12)
; raise the lid
B
and put the pellet in the tank
(fig.13)
. Lower the lid
B
and
move the handle towards the “closed” position
(fig.14)
.
You can load pellet also when the stove is working.
Fig. 11
Fig. 12
SPORTELLO
FUOCO
PELLET LOADING
DOOR
SMOKE OUTLET
DIAMETER 120
REMOVABLE
HAND
STARTING
LEVER
OPEN
POSITION 1