Lambrecht Ser[LOG], Руководство оператора

Страница: 27 / 129

LAMBRECHT meteo GmbH Ser[LOG] Manual Page 27 of 129
3.2 Data Export
With "Data Export", measured values can be transferred to a inserted USB stick within a freely selectable
period of time (in days). In the following example, all collected measured values are read out, which
occurred in the period from "01.01.2017" to "31.01.2017".
From: 01.01.17
To: 31.01.17
Start date
End date
By pressing the rotary pushbutton, you can switch to the respective entry fields TT. MM. JJ (TT=day,
MM=month, JJ=year). The respective digits can be set by turning the rotary pushbutton.
When all necessary data is set, a USB memory stick is required.
Note: The input cannot be cancelled. If an incorrect date has been set by mistake, wait 1 minute until
the display switches off automatically. The Ser[LOG] is then in the basic menu and the input can be
repeated.
Insert USB Stick
The data is exported after inserting the USB stick. The directory "serlog" is created on the stick.
Note: If a directory "serlog" already exists on the stick, its contents will be deleted! The data files and
the configuration file are stored in the directory. The USB memory can be read with the Ser[LOG]-
Commander or the LAMBRECHT MeteoWare CS-4.
3.3 Config Import via USB stick
ATTENTION! When importing a new configuration via USB stick, all previously collected meas-
ured values are automatically deleted!
The configuration to be imported can have been saved by a Ser[LOG] via the "Data Export" function on
the USB stick or was created using the Ser[LOG]Commander. The configuration file "serlog cfg" must
be stored on a USB memory stick in the "serlog" directory. The import is started by the
Config Import
function.
Enter Passwort
000000
To prevent a configuration from being accidentally imported, a password is prompted. The password is
always the current date of the Ser[LOG] in the format TTMMJJ (TT=day, MM=month, YY=year), e. g.
310117 on 31.01.2017.
You can switch to the respective input fields by pressing the rotary pushbutton. The respective digits
can be set by turning the rotary pushbutton. When all necessary data is set, a USB memory stick is
required.