Lambrecht aem INDUSTRY, Руководство пользователя

Страница: 3 / 12

aem.eco
LAMBRECHT meteo | AEM | INDUSTRY
page – 3
Warranty
Please note the loss of warranty and non-liability by unauthorized manipulation of the system. You need a written
permission of the LAMBRECHT meteo GmbH for changes of system components. These activities must be
operated by a qualified technician.
The warranty does not cover:
1. Mechanical damages caused by external impacts (e. g. icefall, rockfall, vandalism).
2. Impacts or damages caused by over-voltages or electromagnetic fields which are beyond the standards and
specifications in the technical data.
3. Damages caused by improper handling, e. g. by wrong tools, incorrect installation, incorrect electrical
installation (false polarity) etc.
4. Damages which are caused by using the device beyond the specified operation conditions.
Features of the INDUSTRY wind sensors
• INDUSTRY wind sensors for measuring wind direction and wind speed
• More energy savings due to minimal power requirements of the heating system
• Year-round use in all climate zones due to standard variants with integrated, controlled heating and thermally
decoupled sensor head
• Low friction, hardly any wear and therefore improved reliability and durability due to double ball bearings of the
measuring elements on the rotary axes
• Maximum load-bearing capacity due to the dimensionally stable wind vane made of fiber-reinforced plastic and
the break-proof three-armed cup rotor
• Easy installation and maintenance due to cable plug-in connections and screw-in fastening
Initial operation
The wind can be represented by a vector quantity. For a complete description of the wind it is necessary to specify its
speed and direction. The two components are subject to spatial and temporal variations; thus, strictly speaking, they are
valid only for the site where the measuring instrument is put up. We therefore recommend to select the place of installation
very carefully.
Selecting the place of installation
Generally, wind measuring instruments should not measure the specific wind conditions of a limited area, but indicate the
typical wind conditions of a wider area. The values measured at different places must be comparable. Thus, when installing
the sensor you should make sure the place of installation is not under the lee of great obstacles. The distance between
the obstacles and the sensor should be 10 times the height of the obstacles (this corresponds to the definition of an
undisturbed terrain).