Lamax Electronics Drive S5 Navi Plus, Руководство пользователя

Страница: 4 / 40

2
Product Installation
1) The front camera attaches to the rear-view mirror using rubber clips. Adjust the mirror so
you can see the rear window. Adjust the front camera lens so that is is roughly aimed at the
front centre of the vehicle.
2) The power cable plugs into the cigarette lighter and should be securely fixed around the
windscreen so as not to obstruct the driver’s view.
3) Attach the rear camera with the 3M adhesive pad to the rear window of the car. The cable
connecting the front and rear camera should ideally run under the upholstery of the car.
Connect the red wire to the reversing lights. When reversing, the display switches to the
image from the rear camera and displays the reversing lines.
4) Some vehicles continue to power the cigarette lighter when the engine is turned off. In this
case, before leaving the vehicle, unplug the power cable from the cigarette lighter.
5) When using the device for the first time, the battery may be low. If the device will not switch
on due to a low battery, manually connect the external power cord and recharge the batte-
ry.
6) Use only microSDHC cards of class 10 and higher from reputable brands. For optimal recor-
ding time, we recommend using cards with a capacity of at least 8GB and up to 32GB. When
using the card for the first time, we recommend formatting it.
Using the LAMAX DRIVE S5 Navi+ Car Camera
1) Inserting a MicroSDHC Card
The microSDHC card should be inserted and removed from the microSDHC card slot only
when the camera is switched off and not connected to a computer or power source.
2) Powering the Device
a) Camera can be powered by connecting it via a USB cable to a computer, using the power
cord or using a USB car charger connected to the car cigarette lighter.
b) Camera is designed to have a constant power supply. The built-in battery can not be re-
moved or replaced.
3) Connecting the Rear Camera
Plug the cable connecting the front and rear camera into the round AV connector on top of
the mirror. In recording mode, the picture is displayed on the back of the camera, in the upper
right corner of the display.
4) Connecting the GPS Module
Plug the GPS module into the round connector at the top of the mirror. Attach the GPS module
on top of the dashboard using the 3M adhesive pad. Securely fix the cable around the wind-
screen so as not to obstruct the driver‘s view.
5) Turning the Camera On and Off
a) To turn the camera on press and hold the ON/OFF button for 3-5 seconds.
b) Camera automatically turns on when connected to a power supply.
c) To turn the camera off press and hold the ON/OFF button for 3-5 seconds.
d) Camera automatically turns off when disconnected from a power supply.
6) Returning to the Menu
Press the Menu button to return to the directory of multimedia system functions.