Laird Lyra S, Руководство пользователя

Страница: 15 / 17

https://www.lairdconnect.com/ 15
© Copyright 2022 Laird Connectivity
All Rights Reserved
Americas : +1-800-492-2320
Europe : +44-1628-858-940
Hong Kong : +852-2762-4823
The Lyra S Development Kit features a Qwiic® connector compatible with Qwiic Connect System hardware. The Qwiic
connector provides an easy way to expand the functionality of the Lyra S Development Kit with sensors, LCDs, and other
peripherals over the I
2
C interface. The Qwiic connector is a 4-pin polarized JST connector, which ensures the cable is inserted
the right way.
Qwiic Connect System hardware is daisy chainable as long as each I
2
C device in the chain has a unique I
2
C address.
Note: The Qwiic I
2
C connections on the Lyra S Development Kit are shared with the mikroBUS I
2
C signals.
The Qwiic connector and its connections to Qwiic cables and the Lyra S are illustrated in the figure below.
Figure 8: Qwiic connector
The table below gives an overview of the Qwiic connections to the Lyra P.
Qwiic Pin Connection Shared Feature Suggested Peripheral Mapping
Ground GND Ground
3.3V VMCU Lyra S voltage domain
SDA PD03 MIKROE_I2C_SDA, BREAKOUT_LEFT5 I2Cx.SDA
SCL PD02 MIKROE_I2C_SCL, BREAKOUT_LEFT6 I2Cx.SCL
The debug USB port can be used for uploading code, debugging, and as a Virtual COM port. More information is available
in
Debugging section.