BT740 Development Kit
Quick Start Guide
Americas: +1-800-492-2320 Option 3
Europe: +44-1628-858-940
Hong Kong: +852-2268-6567 x026
www.lairdtech.com/wireless
6
Laird Technologies
Make SPP Connection from PC to Module
In the previous section, the Windows BT stack has allocated COM32 as the outgoing virtual COM port. You
can open COM32 with a terminal program to make an SPP connection to the module which is on COM47; a
transparent UART communication is established between these two COM ports (
Figure 13
).
Figure 13: SPP connection
The DCD LED indicates SPP connection is established (
Figure 14
).
Figure 14: DCD LED indication
Make SPP Connection from Module to Module
Another Laird module with MAC address 0016A40605F1 is physically connected on COM24 (
Figure 15
).
Figure 15: Module to module connection
In order to make an SPP connection from a module with MAC address 0016A40605F7 to another module
with MAC address 0016A40605F1, issue ATD<peer MAC address> (
Figure 16
).
Figure 16: ATD<peer MAC address> issued