Sentrius RG191+LTE
User Guide
https://www.lairdconnect.com/
22
© Copyright 2020 Laird Connectivity.
All Rights Reserved
Americas
: +1-800-492-2320
Europe
: +44-1628-858-940
Hong Kong
: +852 2923 0610
Dashboard View
In the Dashboard view, the status is shown with a circle that will be green when connected and black when disconnected.
Figure 25: Dashboard view
8.3
Senet
Senet provides two modes of operation: Senet DEV and Senet RAN. In Senet DEV mode the web UI is enabled.
When in
Senet RAN mode the Web UI is disabled and the only way out of that mode is by performing a factory reset
(see
section). After a factory reset, you must contact Senet to be able to reconnect the gateway with the same EUI.
8.4
Semtech Legacy UDP Forwarder
Click
Forwarder
in the left-hand menu of the LoRa pages to access the Forwarder settings.
8.4.1
Mode
The forwarder page allows configuration of the packet forwarder. The mode allows the user to change to different packet
forwarders.
Содержание 450-00107-K1
Страница 1: ...User Guide Sentrius RG191 LTE Version 1 1 ...