LAIKA Ecovip H 2109 Скачать руководство пользователя

Страница: 91 / 126

17.6 Beds with electric handling

(optional)

17.6.1 Bed above the dinette (A type)

a) Bed up control.
b) Bed down control.

17 - INTERNAL COMPONENTS

USER’S GUIDE

Before lowering the bed, it is necessary to lower the
dinette table (night position).

WARNING

When the vehicle is parked for a long time under the
sun, the bed must not remain in fully raised
position: leave a space of at least 10 cm between
the roof-light and the bed mattress.

WARNING

Before lowering the bed, remove the headrest and
backrests on the dinette.

WARNING

Before lowering the bed, position the cab seats so
that they do not interfere with bed movement.

WARNING

Bed handling by means of electric control should
only be performed by adults, and only when the
vehicle is parked.

WARNING

During bed handling by means of electric control,
ensure that no person or thing is in the operating
range of the bed.

WARNING

Control panel

Содержание Ecovip H 2109































































































































Результаты поиска

Содержание Ecovip H 2109

Отзывы:

Похожие инструкции для Ecovip H 2109

Бренды по названию

Популярные бренды

LAIKA Ecovip H 2109, Руководство пользователя

Результаты поиска

Содержание Ecovip H 2109

Отзывы:

Похожие инструкции для Ecovip H 2109

Бренды по названию

Популярные бренды