background image

9.3 Ecovip series 

Main screen 

1) On/off main switch (to turn on/off press for two 

seconds). If the relevant LED is green the control 
panel is on, if it is red an alarm is on (batteries, 
tanks, etc.). 

2) Button for control of engine and auxiliary batteries 

voltage (in Volt) and for the setting of the 
programmable parameters (see "Setting"). 

3) Button for the control of fresh, waste and additional 

(optional) water tanks, for fresh water tank refilling 
function (see "Fresh water tank refilling function") 
and for the parameters setting (see "Setting"). 

4) Button for system setting (see "Setting"). 
5) General light control button (light groups "A" and 

"B"). 

6) Button to switch the pump on and off. 
7) Awning light button; this light switches automati-

cally off when you start up the engine. 

8) Button for “AUX” output power supply . 

9) Sensor for activating the twilight function and 

waking up the control panel with proximity system. 

10) "B2" auxiliary battery status display. 
11) Fresh water tank status display. 
12) External temperature digital indicator. 
13) Internal temperature digital indicator. 
14) Clock digital display. 
15) Date display. 
16) It displays that the "+ key" is activated (the symbol 

appears even when the panel is off). 

17) It displays that the battery parallel is on when 

engine is on (the symbol appears even when the 
panel is off). 

18) It displays that the engine battery recharging unit is 

on. 

19) It indicates that the 230 V power supply is 

connected (the symbol appears even when the 
panel is off). 

20) It indicates the recharging through solar panel (with 

a CBE solar regulator only). 

21) It displays, with "+ key" inserted, that the 230V 

mains is still connected. The alarm is signalled 
even when the panel is switched off. 

22) It displays the minimum voltage control device is 

on. 

23) It displays that the engine battery (B1) has run 

down. 

24) It displays that the auxiliary battery (B2) has run 

down. 

25) It displays that the fresh water tank or the 

additional fresh water tank (optional) is empty.  

26) It displays that the waste water tank is full. 

9 - CONTROL PANEL

52

USER’S GUIDE

Refer to the producer's handbook for further infor-
mation on the control panel.

NOTE

1

2

3
4

5

6

7
8

9

11

10

13

12

14

15

16 17 18

20

19

21 22 23 24 25 26

Содержание Ecovip H 2109































































































































Отзывы: