LAI Games Lighthouse, Руководство оператора

Страница: 17 / 59

Operator's Manual
–
Lighthouse
©
LAI GAMES
Page 12
SOUND, LAMPS & DISPLAY TEST

ENTER The Sound, Lamp & Display test is entered from Attract mode by
pressing the test button once.
DURING THE TEST:
o
Game music and a voice over will be played.
o
The Prize Arm Indicator LEDs will light up in sequence.
o
The Credit display will count from 0000 to 9999 and then repeat.
o
The LED Playfield Display panel will run a test pattern sequence.
o
The Continue, Start/Stop and Select button lamps will flash on and off

EXIT The Sound, Lamp & Display test is exited by pressing the test button.
The next test will be switch test.
SWITCH TEST

ENTER The Switch Test can be entered by pressing the Test button once while
in the Sound, Light & display test or by pressing the Test button twice
while in Attract mode,
C - X X
will be displayed on the 4-digit
display where „XX‟ is a number representing the switch that is active.

TESTING THE GAME SWITCHES
All game switches have a code from C1 to C10 as tabled below. By
activating any of the switches, their code will be displayed on the 4-
digit display. If no switches are active then
C - 0 0
will be
displayed.
CODE DISPLAY SWITCH FUNCTION SWITCH LOCATION
C0
C - 0 0
No Switch Active -
C1
C - 0 1
Ticket Notch is Active Ticket Door
C2
C - 0 2
Service Switch is Active Service Bracket
C3
C - 0 3
Start/Stop button is Active Player Control panel
C4
C - 0 4
Coin 1 Switch is Active
Coin Door
C5
C - 0 5
Coin 2 Switch is Active Coin Door
C6
C - 0 6
Prize Sensor is Active Inside Prize Chute
C7
C - 0 7
Tilt Sensor is Active Inside Rear of Cabinet
C8
C - 0 8
Select Switch is Active Player Control Panel
C9
C - 0 9
Needle Index is Active On Compass Wheel
Normal condition for the game is
C - 0 0
, no switches are active.
* NOTE! *

If there is an active error displayed, press the red test button once to try and
clear the error.

If the error code will not clear, it can be bypass by quickly pressing the red
test button twice.
* NOTE! *

Several switches can be simultaneously activated in Switch test. The display
will then consecutively show their codes, indicating which switches are
active. However, it is much easier to test the game switches individually..