40
Revo 18|36 Lathe \ Adjustments
Side to Side Stock Adjustments
Tail Stock
Loosen the clamp handle on the tailstock and check for side
movement. If it is excessive, Insert an Allen key into the adjusting
screw and tighten.
NOTICE!
By rotating the adjustment screw, it moves into the
adjusting slot which opens and removes the excessive clearance
between the tailstock and the bed.
NOTICE!
Only make very small adjustments and then recheck the
clearance. After adjustment
The tailstock should be slid along the bed to check for any area that
it binds in the bed slot. The same procedure as above should be
conducted on the head stock should it be required.
NOTICE!
It is very unlikely that the headstock will require adjustment
as it is not moved as often as the tailstock, so has less tendency's
for ware.
NOTICE!
Adjoining the side clearance will change the center to center
alignment, please do both procedures.
